Clip-in System
Harsons is Dedicated to Innovating and excel
in the industry to create a better everyday life and atmosphere for our customers, by creating an atmosphere of optimism, teamwork, creativity, and resourcefulness by dealing with everyone in a transparent and ethical manner.
Clip-in System
Tiles/planks are suspended by means of a suspension system comprising 0.5mm galvanized steel clip-in profiles are suspended from the roof structure by GI ceiling brackets. GI suspension angles and hold-on clamps at max. 1200mm center to center along the clip in profile.
Paint Finish
Steel tiles/planks are finished on the exposed side with a backing coat on the rear surface (nominal 5 microns), or with a 50-micron epoxy-polyester powder coating on the exposed surface.
Aluminum tiles/planks are finished on the exposed side with 20-micron polyester coil coating over primer in approving a shade and backing coat on the rear surface (nominal 5 microns) with a 50-micron epoxy-polyester powder coating on the exposed surface. Wall angles are finished with a 50-micron epoxy polyester powder coating.
Perforations/Acoustic
Harsons tiles and planks are also available with perforations for providing acoustic performance characteristics. Tiles and planks are perforated as a standard with 2.5mm dia. holes at 5.5mm centre to centre glasswere mineral wool (48 kgm2) provide good sound absorption. Tiles and planks are also available with a factory applied acoustic tissue to the back side which provides good sound absorption.
Get in Touch with Us
Thank you for your interest in connecting with us. Whether you have questions, or feedback, or you’d like to explore opportunities for collaboration, we’re here to assist you.